FDL type plate magnets are used for separating iron from less severely contaminated materials. To ensure a robust construction and flexible mounting possibilities, this type of magnet is built with a steel omega profile. This means the magnets also have flanges on which hinges or locks can be mounted. The surface that comes in contact with the material flow is wear resistant. On special order, the magnets can also be supplied with a stainless steel cover for the magnetic surface.
FDL (/C, /V) Plate magnets
Under normal circumstances Bakker Magnetics provides a life-time guarantee on the applied ceramic magnets.
FDL Plate magnets
Execution:
Plate magnet type FDL
Sturdy construction
Permanent magnetic
Housing:
Steel S235 with thread holes in the back
Surface treatment:
Anti-corrosion primer
Painted blue RAL5015
Magnetic part:
Permanent ceramic magnets quality BM7 or
Permanent Neodymium magnets quality BM35
FDL/C Plate magnet
Execution:
Plate magnet type FDL/C
Sturdy construction
Permanent magnetic
Ferrous particles are collected behind the raised edge of the sloping pole.
Housing:
Steel S235 with thread holes in the back
Sloping pole on the surface
Surface treatment:
Anti-corrosion primer
Painted blue RAL5015
Magnetic part:
Permanent ceramic magnets quality BM7 or
Permanent Neodymium magnets quality BM35
FDL/V Plate magnet
Execution:
Plate magnet type FDL/V
Sturdy construction
Permanent magnetic
Equipped with ‘fingers’ to give a thorough separation of ferrous particles.
Housing:
Steel S235 with thread holes in the back
Fingers:
Ø12x60mm
Surface treatment:
Anti-corrosion primer
Painted blue RAL5015
Magnetic part:
Permanent ceramic magnets quality BM7 or
Permanent Neodymium magnets quality BM35
FDA Plate magnets
Plate magnets, standard executed with ceramic magnets. Sides which can make contact with the product flow are made out of stainless steel (AISI304). For easy mounting there are thread holes inside in the back of these plates. On special request different sizes can be manufactured. To make cleaning of the magnets easier these FDA’s can be executed with a so called “cleaning drawer”.
Under normal circumstances Bakker Magnetics provides a life-time guarantee on the applied ceramic magnets.
FDA Plate magnet
Execution:
Plate magnet type FDA
Sturdy construction
Permanent magnetic
Housing:
Stainless steel 1.4301
Rear plate:
Steel S235 with thread holes
Surface treatment:
Anti-corrosion primer
Painted blue RAL5015
Magnetic part:
Permanent ceramic magnets quality BM7 or
Permanent Neodymium magnets quality BM35