Overbelt magnets for situations where the magnet is placed parallel to the conveyor belt. The magnet system removes the ferrous particles from the passing flow of materials. Because of this positioning the ferro particles remain in the magnetic field for a longer period which leads to a better separation. The multipole transport magnet “cleans” the attracted ferro particles by spinning them in the magnetic field. This causes nonmagnetic particles to fall. The belt speed of the overbelt will match or exceed the speed of the conveyor belt underneath, therefor longer ferro particles will simply be transported away and will not be able to cause any damage to the conveyor. The longitudinal overbelt can be made to customer need to fit any application.
Longitudinal Overbelt magnets
Surface treatment of overbelt magnets:
Anti-corrosion primer
Painted blue RAL5015, guards yellow RAL1021
Magnetic part:
Permanent ceramic magnets quality BM7 Transport pole length (H) 800mm as standard.
Motor:
SEW motor
Belt:
Synthetic rubber with vulcanized idlers. The crowned shape of the drums make the belt path selfadjusting.
On request:
- Control cabinet with thermal overload protector, pushbutton ON / OFF, emergency stop and 2 Signal lights (ON / OFF).
- Correx Blue; belt equipped with a wear resistant layer of Correx Blue 45° shore.
- Extra strong Neodymium version.
Overbelt magnets
Overbelt magnet systems are used to separate metals on conveyor belts. For this purpose they are suspended above the conveyor belt. The magnet system removes the ferrous particles from the passing flow of materials. After leaving the magnetic sector, these iron particles are dropped into a receptacle. At the active side the magnet is shielded by a stainless steel wearing plate. This type of separating system is often used in industries to avoid machinery, such as shredders, being damaged by the iron particles.
Surface treatment:
Anti-corrosion primer Painted blue RAL5015, guards yellow RAL1021
Magnetic part:
Permanent ceramic magnets quality BM7 or Permanent neodymium magnets quality BM35
Motor:
SEW motor
Belt:
Synthetic rubber with vulcanized idlers. The crowned shape of the drums make the belt path selfadjusting.
On request:
- Control cabinet with thermal overload protector, pushbutton ON / OFF, emergency stop and 2 Signal lights (ON / OFF).
- Correx Blue; belt equipped with a wear resistant layer of Correx Blue 45° shore.
